WC&P International
 
Home  |  Archive  |  Links  |  Media Kit  |  About WCP  |  Contact WCP  |  Glossary  |  Videos

SUBSCRIBE  |  BUYER'S GUIDE  |  CALENDAR  |  PRODUCT TRADE SHOW  |  HISTORY PROJECT  |  CLASSIFIEDS

Current IssueOctober 01, 2014

Search Products

Product Category:

 

Company Name contains:

 

Registered users login here to see extended content.
 
Products from Minnesota Rubber and Plastics only.
Products 1 to 4 of 4
 Rubber Seals  Metal-to-plastic components
<b>Minnesota Rubber and Plastics</b>’ static, face-seal gaskets, custom-designed and molded of liquid silicone rubber, provide superior strength and improve design function in most plumbing-related products. Available for both radial and axial applications, these LSR sealing devices are well suited for environments where temperature variation and resistance to aging are important design considerations. The typical liquid silicone rubber properties for grades <i>ASTM DZZ40</i> durometer is shore A of 20 to 80 with a tensile strength for <i>ASTM D412</i> of 1,150 to 1,750 psi. These grades have high heat resistance to + 180°C and good flexibility to  -45°C. They have excellent electrical insulating characteristics and resist UV radiation and weathering. Additional design advantages to these LSR static face seals include: ability to handle high-pressure limits with thinner cross sections; very clean molding process with no material pre-processing needed; minimal flash with very little gate or flash material waste; short repeatable cycle times and reduced secondary operations. www.mnrubber.com, (952) 927-1400Minnesota Rubber and Plastics’ static, face-seal gaskets, custom-designed and molded of liquid silicone rubber, provide superior strength and improve design function in most plumbing-related products. Available for both radial and axial applications, these LSR sealing devices are well suited for environments where temperature variation and resistance to aging are important design considerations. The typical liquid silicone rubber properties for grades ASTM DZZ40 durometer is shore A of 20 to 80 with a tensile strength for ASTM D412 of 1,150 to 1,750 psi. These grades have high heat resistance to + 180°C and good flexibility to -45°C. They have excellent electrical insulating characteristics and resist UV radiation and weathering. Additional design advantages to these LSR static face seals include: ability to handle high-pressure limits with thinner cross sections; very clean molding process with no material pre-processing needed; minimal flash with very little gate or flash material waste; short repeatable cycle times and reduced secondary operations. www.mnrubber.com, (952) 927-1400 <b>Minnesota Rubber and Plastics</b> offers metal-to-plastic component conversions, proven to lower costs, reduce weight, increase corrosion resistance and perform better in many applications. By replacing aluminum components with polyphenylene sulfide (PPS), weight can be reduced while also reducing costs. In addition, many high-performance, plastic-molded components can be recycled. The company reviews each application ensuring the design and material selected are best suited for their intended application. When design is finalized, components are tested using finite element analysis (FEA) so that thickness is optimized, eliminating excess plastic and reducing costs. www.mnrubber.com, webmaster@mnrubber.comMinnesota Rubber and Plastics offers metal-to-plastic component conversions, proven to lower costs, reduce weight, increase corrosion resistance and perform better in many applications. By replacing aluminum components with polyphenylene sulfide (PPS), weight can be reduced while also reducing costs. In addition, many high-performance, plastic-molded components can be recycled. The company reviews each application ensuring the design and material selected are best suited for their intended application. When design is finalized, components are tested using finite element analysis (FEA) so that thickness is optimized, eliminating excess plastic and reducing costs. www.mnrubber.com, webmaster@mnrubber.com
Minnesota Rubber and Plastics [more]
http://www.mnrubber.com
Minnesota Rubber and Plastics [more products]
http://www.mnrubber.com
 Filter screen assemblies  Light-weight control valve
Molded screen insert assemblies from <b>Minnesota Rubber and Plastics</b> are custom designed for a wide range of applications to filter out fluid contaminants and reduce product failure. Custom designs are possible to filter out contaminants of all kinds, from small particles in transmission and hydraulic fluids to heavy brine particles in food processing systems. A wide range of screen options are available in many materials for difficult filtration applications allowing use with most fluids. Filter assembly orifice sizes range from 0.71 to 1.4 mm. www.mnrubber.com, (952) 927-1400Molded screen insert assemblies from Minnesota Rubber and Plastics are custom designed for a wide range of applications to filter out fluid contaminants and reduce product failure. Custom designs are possible to filter out contaminants of all kinds, from small particles in transmission and hydraulic fluids to heavy brine particles in food processing systems. A wide range of screen options are available in many materials for difficult filtration applications allowing use with most fluids. Filter assembly orifice sizes range from 0.71 to 1.4 mm. www.mnrubber.com, (952) 927-1400 Minnesota Rubber introduces a water control valve converted from brass to a molded plastic assembly, providing lighter weight without sacrificing structural performance or  water flow rates. The design consists of a three-part body configuration, hot plate-welded together to create a 75 percent weight reduction. Features include a non-corrosive reinforced thermoplastic body, identical inlet and outlet plumbing connections and leak pressure testing of each welded valve prior to shipping.Minnesota Rubber introduces a water control valve converted from brass to a molded plastic assembly, providing lighter weight without sacrificing structural performance or water flow rates. The design consists of a three-part body configuration, hot plate-welded together to create a 75 percent weight reduction. Features include a non-corrosive reinforced thermoplastic body, identical inlet and outlet plumbing connections and leak pressure testing of each welded valve prior to shipping.
Minnesota Rubber and Plastics [more]
http://www.mnrubber.com
Minnesota Rubber and Plastics [more products]
http://www.mnrubber.com